Find Feeding Pumps,Aggregate Processing Slurry Pumps,Secondary Grinding Slurry Pumps on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Rubber Bearing Press > 65ZJW Filter Press Feeding Pumps

65ZJW Filter Press Feeding Pumps

  • 65ZJW Filter Press Feeding Pumps
  • 65ZJW Filter Press Feeding Pumps
  • 65ZJW Filter Press Feeding Pumps

65ZJW Filter Press Feeding Pumps

    Payment Type: L/C,T/T,D/P,Paypal,Western Union
    Terms of Trade: FOB,CFR,CIF
    Min. Order: 1 Set/Sets
    Delivery Time: 15 Days
    Packaging: Wooden packing
    Productivity: 500 sets/month
    Brand: Naipu
    Transportation: Ocean,Land,Air
    Place of Origin: China
    Supply Ability: 500 sets/month
    Certificate: CE Certificate ;ISO9001:2008
    HS Code: 8413709990
    Port: Tianjin,Shanghai,Qingdao

Basic Info

Model No.: 65ZJW

Type: Clay Wet Sand

Casting Method: Thermal Gravity Casting

Sand Core Type: Clay Sand Core

Application: Machinery Parts

Machining: Boring Machine

Material: Steel

Surface Treatment: Sand Blast

Surface Roughness: Ra0.4

Standard: GB

Certification: SGS, CE, ISO 9001:2008

65ZJW Feeding Pumps: 65

Product Description

65 zjw Filter Press Feeding Pumps

Cantilevered horizontal centrifugal slurry pumps/rubber lined slurry pumps/R55 slurry pumps /gland seal slurry pumps/centrifugal seal slurry pumps/wear resistant rubber slurry pumps/ interchangeable slurry pumps/Coal washing slurry pumps/Sand and gravel handling slurry pumps /Effluent handling slurry pumps /minerals flotation processing pumps/coal washing pumps/Feeding Pumps

Naipu® NP-ZJW series filter press feeding pump accept unique hydraulic desin and installation mode of the

impeller,ensure that its pump performance curve be more steep than normal pumps,is more suitable to use in the

filter press feed varies according to the changes of the resistance in order to realize the large capacity,

low pressure feeding and low capacity,high pressure filter.The pump is widely used in the coal washery,

environmental protection,aluminum factory,smelting plant etc.


Construction Drawing

drawing-1




The structure chart of the feeding pump

1.Two-phase volute 2.Two-phase impeller

3.One-phase volute 4.Back plate

5.Feeding room 6.Locating bush

7.Expeller 8.Expeller cover plate

9.Decompression body 10.One-phase impeller

11.Tie-bar 12.Shaft sleeve

13.Cover plate 14.Disassembly ring

15.Water retaining plate 16.Bearing

17.Shaft 18.Bearing spacer sleeve

19.Bearing cover 20.Frame

21.Bent pipe


NP-ZJW PUMP SELECTION CHART

selection chart



NP-ZJW FEEDING PUMP PERFORMANCE PARAMETERS

Performance Parameters


Product Overviews:

Filter Press Photos


Possible Faults and Settlements.


Faults

Reason

Settlement

1.Pump fails to discharge any water,The hand of pressure gauge beat violently

1.Suction pipe don`t have enough water.

2.Suction pipe blocked or the valve is locked.

1. Inject enough water

2.unlock the inlet valve,clear the blocks

3.Exclude the air leakage

2.The pump can`t discharge water,the hand of vacuum meter beat heavily.

1.The inlet valve is unlocked or silted up.

2.The resistance of suction pipe is too big or silted up.

3.The height of suction is too high.

1.Unlock the valve or desilting

2.improve the design of suction pipe or desilt

3.Lower the height of the installation.

3.The pump can`t discharge water,pressure gauge shows heavy pressure.

1.The resistance of the discharge pipe is too big.

2.The impeller blocked

3.The speed is slow.

1.Check and adjust the outlet pipe.

2.Clear the impeller

3. Improve the speed.

4.The pump doesn`t rotate

The volute is silted up by the blocks.

Clear the blocks

5.The capacity is not enough

1.The blocks of the impeller or the inlet or outlet pipe.

2.The abrasion of the impeller is heavily.

3.The speed is low to normal

4.Pump is installed unreasonably or the leakage of the inlet pipe.

5.The transporting height is too high,the loss of the resistance of the inside pipe are too big.

6.The inlet valve not open enough or blocked

7.The packing seal leaks

1.Clear the impeller or pipe.

2.Change the impeller

3.Adjust the speed

4.Install again or stop leaking.

5.Decrease the height of the transport or reduce the resistance.

6.Unlock the inlet valve

7.Compress the packing tightly

6.The motor of the pump is overloaded

1.The head of the pump exceeds the head of the working condition.

2.Not consider the slurry density when selecting the pump.

3.The packing press tightly

1.Turn down the outlet valve,cut the impeller or lower the speed.

2.Select the motor again.

3.Adjust the the screw of the packing gland

7.Abnormal sound in the pump, and no water out

1.The resistance of the inlet pipe is too big.

2.The height of the suction is too high.

3.Cavitation occurred

4.there is air in the inlet

5.The temperature of the liquid is too high

1.Clear the suction pipe and sluice valve.

2.Lower the height of the suction

3.Adjust the water valve and let the pump operate in the defined limits.

4.Block the leakage.

5.Lowering the liquid temperature.

8.pump vibrates

1.pump cavitate

2.The block of the impeller single vane

3.The no concentricity between the pump shaft and motor shaft

4.Fasteners or foundation loose

1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet.

2.Clear the impeller

3.Alignment again

4.Fasten the screw,and reinforce the foundation.

9.Bearing is overheat

1.lock the cooling water

2.lubrication is not good.

3.the lubrication oil is not clear

4.the wrong direction of the thrust bearing.

5.there is something wrong with the bearing.

1.Open the cooling water

2.Adjust the oil quantity

3.Clear the shaft,change oil

4.According to the inlet pressure,adjust the direction of the thrust bearing.

5.Change the bearing

10.Packing short life

The material of packing is not good

Change the packing

11.pump leak oil

1.High oil level

2.The rubber parts invalid

3.Assembly problem

1.Lower the oil level

2.Change rubber spares

3.Adjust the assembly

12 Pump head leaking

1.The rubber parts not press well

Assembly again or press tightly





FAQ:

Q1. Are you a manufacturer factory?

Yes,we are the direct manufacture factory,and have more than 10 years' experience in this area.

Q2.Do you have stock products to sell?

Some we have in stock ,but the others not. Since we always produce these products according to customers requirements.

Q3.What advantages do you have?

A: We are direct manufacturer and the price is competitive.

B: Our engineer are very experieced in this area, and we can do OEM service to you.

C:We are factory, and we can arrange production schedule,so as to punctual delivery.


Contact Details:

Shijiazhuang Naipu Pump Co.,Ltd.

Add:No.368 Xinshi North Road,Shijiazhuang Hi-Tech Industry Development Zone, Hebei,China,050091.

Tel:0086-311-897162903

Fax:0086-311-87162902

Contact Person: Karen Tan

Skype: karen_naipump











  • 1
  • 2
  • 3
  • 4
  • 5
 Shijiazhuang Naipu Pump Co.,Ltd is a professional manufacturing enterprise of slurry pumps located in high and new technology development zone. The enterprise has one group of high quality technical and management talent working in Design, R & D, Production, Sales and Services. The technical team consists of talents specialized in hydraulic machinery, casting, heat treatment, engineering, material science and machining. The company manufactures its products using advanced technique based on well built management and sales & service system. Product quality is guaranteed with various test and inspection facilities.. Naipu is specialized in the manufacture and sales of slurry pump and pump parts, especially the design and manufacture of products made with high abrasive, anti corrosive rubber material, including NP-AH(R).NP-M.NP-HH.NP-SP(R).NP-G series slurry pump, NP-ZG.NP-ZJG series slurry pump, NP-WS series dredging pump and NP-PNJ series slurry pump. The products are widely used in mining, power, metallurgy, coal, dreading, building material and other Industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries. Meeting customers` technical requirements and with a long lifespan, lower cost and high safety, our products are sold well all over of china and far to southeast Asia, Noth America, South America,Russia and etc. We are confident that we can offer customers satisfying products and services with our continuous efforts in product research and improvement. We look forward to working with customers domestic and abroad to build a promising future. We can develop and produce a range of pumps according to different media situation to meet different duty requirment. There are rubber material (R08 , R12, R26, R33, R38, R55, S03,S12,S31,S21,S51,S52 U01 and etc) , wear resistant metal material( A05,A07, A33, A49, A61 and etc) ,Corrosion Resistant stainless steel material (201,304, 316, 316lL and etc ) , fully meet customers` request. We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.

Company Info

  • Company Name: Shijiazhuang Naipu Pump Co., Ltd.
  • Representative: shushenwang
  • Product/Service: Horizontal Slurry Pumps , Vertical Slurry Pumps , Submersible Slurry Pumps , Slurry Pump Spare Parts , OEM Slurry Pump And Parts , AH Model Slurry Pumps
  • Capital (Million US $): 5000000RMB
  • Year Established: 2006
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 71% - 80%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 1,000-3,000 square meters
  • Factory Location: taiba road,shijiazhuang city
  • Contact Person: Ms. Betty Zhang
  • Tel: 86-0311-87162903
Email to this supplier
  • *Subject:
  • To:
    Lex Song
    Mr. Lex Song
  • *Messages:
    Your message must be between 20-8000 characters